Risco ProSYS 40 - Defining a User Limitation Schedule

50 ProSYS User's Manual
19)
VAC: STOP2 S:02
00:00
Enter the second time at which the UO is to be
deactivated on vacation.
20)
UO ON/OFF S:02
5)LABEL
Select [5] Label.
21)
SCHEDULE LABEL
SCHEDULE 02
Enter a name for the schedule, as described in
the table on page 40.
22)
SCHEDULER:
03)SCHEDULE 03
Define additional weekly schedules, as required.
Defining a User Limitation Schedule
A user limitation schedule automatically prevents certain users from
disarming the system during specified time intervals. By default, all users of
the system operate without this limitation.
When defining a user limitation schedule, you need to define the following
parameters: On/Off, Users, Time Schedule, and Label.
NOTE:
By default, all users are not restricted.
¾ To define a user limitation schedule:
1)
USER FUNCTIONS:
1) BYPASS
USER FUNCTIONS:
1) BYPASS
From the User Functions menu, select
[6] Clocks.
2)
INSERT CODE:INSERT CODE:
Enter your user code.
3)
SET CLOCKS:
1) SYSTEM TIME
SET CLOCKS:
1) SYSTEM TIME
Select [5] Scheduler.
4)
SCHEDULER:
01)SCHEDULE 01
SCHEDULER:
01)SCHEDULE 01
Select a schedule other than those already being
used for automatic arming or UO activation.
5)
SCHEDULE 03:
1)ARM/DISARM
Select [3] User Limit.