Risco ProSYS 40 - CHAPTER 9: SETTING AND CHANGING SYSTEM TIME AND DATE

ProSYS User's Manual 43
Chapter 9: Setting and Changing System
Time and Date
[*] [6] [CODE] [#] [1] / [2]
The correct time and date must be set to ensure proper operation of the
ProSYS.
Setting and Changing System Time
The system time is set and changed from the Set Clocks menu.
¾ To set/change the system time:
1)
USER FUNCTIONS:
1) BYPASS
USER FUNCTIONS:
1) BYPASS
From the User Functions menu, select
[6] Clocks.
2)
SET CLOCKS:
1) SYSTEM TIME
SET CLOCKS:
1) SYSTEM TIME
Select [1] System Time.
3)
INSERT CODE:INSERT CODE:
Enter your user code.
4)
ENTER SYS TIME:
00:31
ENTER SYS TIME:
00:31
Enter the correct time in 24-hour format.
Your local installer: www.eaglesecuritysolutions.co.uk