Risco ProSYS 40 - Setting and Changing System Date

44 ProSYS User's Manual
Setting and Changing System Date
The system date is set and changed from the Set Clocks menu.
¾ To set/change the system date:
1)
USER FUNCTIONS:
1) BYPASS
USER FUNCTIONS:
1) BYPASS
From the User Functions menu, select
[6] Clocks.
2)
SET CLOCKS:
1) SYSTEM TIME
SET CLOCKS:
1) SYSTEM TIME
Select [2] System Date.
3)
INSERT CODE:INSERT CODE:
Enter your user code.
4)
ENTER SYS DATE:
JAN 3 (2003) FRI
ENTER SYS DATE:
JAN 3 (2003) FRI
Enter the correct date.
Use the
/ and / keys to
move the cursor and the
/ key to
toggle among the choices.