Advanced Features
Automatic Sorting into Groups [Program]
41
Saving Programs
If you have stored the frequently-used program settings in memory, you can retrieve them for later printing.
Six programs can be stored.
1
Set the program.
Enter the required program settings from the Con-
trol Panel.
For details on the setting operations, refer to the
steps 1 ()p.39) through 6 ()p.39).
2
Press the key.
Store program settings.
3
Enter the program number using the
Print Quantity keys.
Select a program number from 1 to 6.
Important!:
• When a program number that has already been
stored is selected, [a] is displayed on the right-
most digit.
• Since selecting a number that has already been
stored overwrites the previous settings, please
confirm the settings on the display before sav-
ing on the same number.
4
Press the key.
Program setting is stored and [Program number]
is displayed.
Note:
• After storing a program, pressing the key to
finish saving the program. By pressing key,
you can print with a stored program.
KZ30_UG.book Page 41 Monday, December 21, 2009 11:11 AM
To Next Page
Loading...
