Riso SF5 Series - Page 56

54
Chapter 2 Working with the Printer Driver
54
Chapter 2 Working with the Printer Driver
4
Inksaving
The ink saving function of the printer is activated when this check box is selected. The volume of ink used for printing
will be reduced compared with normal operation.
B
In case of selecting [Ink saving], the printing image might be lighter or erased depending on darkness of the original
image.
5
Copies
You can use this eld to specify the number of copies if no eld is prepared for print quantity entry in your application
software. When the number of copies can be specied in the [Print] dialog box of the application software, on the
other hand, you can ignore this setting because it has no effect on printing operation.
6
AutoProcess
You can specify how to process your print jobs on your RISO printer, i.e. to complete them without interruption or to
interrupt them after a specied process step. By interrupting your print jobs, you can check print position and quality
with test prints before printing process or change the print job ow according to your print requirements. The available
process ows are as follows.
ON:
To complete print jobs without operator involvement on your RISO printer. No pause is made between master-making
and printing processes until the end of print jobs.
Pausebefore“Master-making”:
To interrupt print jobs before each master-making process, thus allowing you to handle a stack of printed copies.
Pausebefore“Print”:
To interrupt print jobs before each printing process, thus allowing you to check a sample print.
OFF:
To interrupt print jobs before each process step, i.e. both master-making and printing processes.
B
FortheSF9SeriesPrinterDriver,[Auto-process]isavailableonlywhenyouselect[PrintOnly].(
A
44)(The
settingisnotvalidfor[StorageOnly].)Forstoreddata,setthe[Auto-process]modefromtheprinterdisplay
whenthedataisretrieved.
B
FortheSF9SeriesUSBash-via-PrinterDriver,master-making/printingisexecutedaccordingtothe[Auto-
process]settingmadeherewhen[Output](
A
44)issetto[USBprint(Autoprocess)].Forthatreason,when[Pause
before“Master-making”]or[OFF]isselected,master-makingdoesnotstartautomatically.
7
Output
[Basic] Tab - [Output] (
A
44)