Riso SF5 Series - Page 57

Chapter 2 Working with the Printer Driver
55
Chapter 2 Working with the Printer Driver
55
8
Programprinting
C
Not displayed in the SF5 Series.
Printing jobs are conducted in sets of copies. One set should contain at least one page. By selecting program printing,
you can click [Details]. Click [Details] to open [Program printing] dialog box.
Copies : Enter the value for number of pages per set to be printed.
Sets : Enter the value for number of sets to be printed.
Reset : Returns Copies and Sets to their defaults.
Jobseparation
Tape : Tape is inserted into each group.
OFF : No job separation is performed.
To use the job separator mode, the optional job separator is required.
9
Outputreversal
Placing a checkmark here outputs copies in reverse order.