RKI Instruments HS-04 - Last Successful Calibration Date (CAL.DATA); Last Successful Bump Test Screen (BP.DATA)

HS-04 Operator’s Manual Chapter 4: Display Mode • 33
Last Successful Calibration Date (CAL.DATA)
The CAL.DATA screen shows the date of the last successful calibration. This screen only appears
if CAL.RMDR is set to ON (factory setting).
1. After entering Display Mode, press and release POWER MODE until the CAL.DATA screen
sequence appears.
2. Press AIR to enter the CAL.DATA screen. The date of the last successful calibration displays.
3. Press and release POWER MODE to return to the CAL.DATA screen in Display Mode.
Last Successful Bump Test Date (BP.DATA)
The BP.DATA screen shows the date of the last successful bump test. This screen only appears if
BP.RMDR is set to ON (factory setting is OFF).
1. After entering Display Mode, press and release POWER MODE until the BP.DATA screen
sequence appears.
2. Press AIR to enter the BP.DATA screen. The date of the last successful bump test displays.
DISP
CAL .DATA
DISP
YES / AIR
DISP
NO /MODE
2019
10.24
CAL .DATA
DISP
BP .DATA
DISP
YES / AIR
DISP
NO /MODE
2019
10.24
BP .DATA