HS-04 Operator’s Manual Appendix A: Maintenance Mode • 91
Viewing the ROM/SUM (ROM/SUM)
The ROM/SUM screen shows the instrument’s firmware version and firmware checksum.
1. While in Maintenance Mode, press AIR to scroll to ROM/SUM.
2. Press and release POWER MODE. The screen shows the ROM/SUM. The ROM is the top
value and the SUM is the bottom value.
3. Press and release POWER MODE to return to the ROM/SUM item in Maintenance Mode.
4. See “Entering Measuring Mode (START)” on page 92 to enter Measuring Mode.
Performing a Default (M.DEF)
Performing a default operation in Maintenance Mode returns all parameters to their RKI factory
settings.
1. While in Maintenance Mode, press AIR to scroll to M.DEF.
2. Press and release POWER MODE.
To Next Page
Loading...
