RKI Instruments HS-04 - Alarm Settings (ALARM-P)

HS-04 Operator’s Manual Chapter 5: User Mode and Calibration • 61
Alarm Settings (ALARM--P)
The ALARM--P menu has 3 items: ALARM--P, DEF.ALMP, and ESCAPE.
1. While in User Mode, press AIR to scroll to ALARM--P.
2. Press and release POWER MODE. The first screen displays.
Setting the Alarm Points
1. After entering the ALARM-P menu, press AIR to scroll to the gas name.
2. Press and release POWER MODE.
3. The Warning setpoint flashes.
ALARM-P
H2S
ALARM-P
ppm
AIR
AIR
AIR
H2S
ALARM-P
ppm
DEF .ALMP ESCAPE
H2S
5.0
WARNING
ppm
H2S
30.0
ALARM
ppm
H2S
100.0
ALARM H
ppm
H2S
5.0
STEL
ppm
H2S
1.0
STEL
ppm
H2S
ALARM-P
ppm
For all settings:
1) AIR to adjust
2) POWER MODE
to save and
continue