RKI Instruments HS-04 - Settings and Configuration

34 • Chapter 4: Display Mode HS-04 Operator’s Manual
3. When you are done viewing the last bump test date, press and release POWER MODE to
return to the BP.DATA screen in Display Mode.
Date/Time Screen (DATE)
The DATE screen shows the instrument’s date and time.
Temperature Screen (TEMP)
The TEMP screen shows the surrounding area’s temperature.
Alarm Points Screen (ALARM--P)
The Alarm Points Screen shows the gas alarm settings.
1. After entering Display Mode, press and release POWER MODE until the ALARM--P screen
sequence appears.
2. Press and release AIR. The Full Scale Setting screen appears.
2020
4.21
10:40
25C
TEMP
DISP
ALARM-P
DISP
YES / AIR
DISP
NO /MODE