Roberts DreamDock 2 - Dynamic Range Control (DRC) - DAB

14
Dynamic Range Control (DRC) - DAB
Dynamic range control (also known as DRC) can make quieter sounds
easier to hear when your clock radio is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1 Maximum compression applied.
DRC 1/2 Medium compression applied.
1. Press the On / Off control to switch on your clock radio.
2. Press and release the Mode button until the DAB mode is selected.
3. Press and release the Menu button.
4. Press the Tuning Up or Down buttons until 'DRC Value' appears on
the display. Press and release the Select button. The current DRC
value will be marked with an asterisk.
5. Press the Tuning Up or Down buttons to select the required DRC setting
(default is 0) .
6. Press and release the Select button to confi rm the setting. The display
will return to the previous display.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the clock radio
will have no effect.
3
4,5 4,5
4,6
2
*