30
Controlling alarm status using the remote control -
Standby
When your clock radio is in standby, the alarms can be controlled using
the Alarm button on the remote control. This avoids the risk of disturbance
to someone who is asleep.
1. To change the states of the alarms press and release the Alarm button
on the remote control. The display will cycle through all combinations
of alarms on and off on both alarms.
2. To save the alarm status press and release the Select button. 'Alarm
Saved' will show on the display.
Controlling alarm status using the product
When your clock radio is in standby the alarms can be controlled using
the alarm buttons on the product. This avoids the risk of disturbance to
someone who is asleep.
The same method can be used to switch the alarm on or off while the
radio is playing.
1. To change the states of the alarms press and hold Alarm button
1 or 2.
1
1
2
1
2
To Next Page
Loading...
