Robin EC12 User Manual

Step
Tools
Remarks PtO&d"&!. Part to remove
5.
wrench
(2) Unplug spark plug cap from high tension baffle
lOmm Socket
(I) Detach spark plug cap.
Cylinder
cord.
M6 X 16mm tapping bolt ..... .3 pcs
M6 X 8mm flange bolt ...... 1 pc.
M6 X 12mm flange bolt ...... 1 pc.
(4) Clamp on engine stop switch wire to be
removed same time.
(3) Remove cylinder baffle.
6.
(2) Remove starter pulley and spacer. and spacer
wrench M6
X 12mm bolt and washer ...... 4 pcs
Starter pulley
1 Omm Socket (1) Remove recoil starter.
Recoil starter.
M6
X 25mm bolt and washer ..... -3 pcs
7.
wrench (2) Remove blower housing from crankcase.
housing
I Omm Socket (1) Disconnect stop switch wire. (black)
Blower
M6
X 20mm bolt and washer ..... -3 pcs
M6 X55mmboltandwasher ...... 2pcs
(3) Clamp on blower housing to be removed
Same time.
(4) Detach grommet on high tension cord.
- 17-

Robin EC12 Specifications

General

Brand	Robin
Model	EC12
Category	Engine
Language	English