5-2-2 CONDENSER
A
condenser is mounted on the rear cover and is
connected to the condenser coil which is wound on
the stator. This condenser and condenser coil regu-
late the output voltage.
5-2-3 ROTOR
The rotor consists of a laminated silicon steel
sheet core and field coil which is wound over the
core.
DC current in the field coil magnetizes the steel
sheet core. Two permanent magnets are provided
for the primary exciting action.
A cooling fan is pressure-fitted on the end of the
rotor shaft to cool the coils, cores, rectifier, and
other generator parts. (See Fig. 5-4)
A diode rectifier and resister are mounted inside of
the insulator. (See Fig. 5-5)
Cooling air is sucked by the rotor fan through the
slits of the rear cover and is expelled through the
outlets of the front cover.
I
Fig. 5-3
Fig. 5-4
DE RECTIFIER
Fig. 5-5
-8-
To Next Page
Loading...
Need help?
General
