Chapter 7-8
Robomow RL555, RL855, RL2000
7.2.11 Blades replaced
Use the Blades Replaced option after having replaced the blades. This
will restart the reminder counter, so it reminds you
to replace the blades
again after the next 200 hours of operation. (For details about
replacing the blades, see 10.3).
7.2.12 Rain sensor
The Rain sensor feature enables Robomow to detect rain and to skip or
stop the operation when rain is detected.
There are three options under the Rain sensor menu:
P Rain sensor on/off – to turn the rain sensor feature off, for Robomow
to operate even in rain and in wet grass conditions.
P Reading – to display the actual reading of the rain sensor.
P Set sensitivity –to set the sensitivity of the rain sensor.
The default sensitivity is set on 9. This means that any reading below 9 will cause
Robomow to detect rain and stop operating.
7.2.13 Anti-Theft
Use the anti-theft option to set a code that will have to be entered in
order to activate Robomow.
You will be prompted to enter a four-digit code of your choice to use
as your personal security code.
P To change an existing password, you will first be prompted to
enter your old password.
c IMPORTANT c Be sure to record your code for future
reference.
You will find a place to record your personal security code in
Chapter 9 of this manual.
Anti theft
Press GO
Anti theft off
Press GO
Change password
Press GO
To Next Page
Loading...
Need help?
General
Weight and Dimensions
