Chapter 7-7
Setting Robomow and using Advanced Features
7.2.10 Signal Type
In some circumstances there may be interference to the wire signal
caused by other wire signal activated in adjacent lawn (neighbor that
use robotic lawnmower) or by any other appliance using similar
frequency. In case of signal interference, you may see one of the
following symptoms (usually close to the neighbor lawn):
a. Robomow is widely swinging when driving along the wire;
b. Robomow changes direction without reaching the wire;
c. Robomow crosses the wire outside the designated area;
d. ‘Start inside’ message is displayed although Robomow is inside the
designated area and the perimeter wire is connected in the right
polarity;
If your mower faced one of the above symptoms, to change the signal type
call to service.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
