Robustel GoRugged R3000 - Page 120

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 119 / 124
Confidential
# set lan network 1 ip 172.16.99.22 //set IP address for lan
OK //setting succeed
# set lan network 1 netmask 255.255.0.0
OK
#
…
# config save_and_apply
OK // save and apply current configuration, make you configuration effect
Example 5: CLI for setting Cellular
# show cellular all
sim {
id = 1
card = sim1
phone_number = ""
extra_at_cmd = ""
network_type = auto
band_select_type = all
band_gsm_850 = false
band_gsm_900 = false
band_gsm_1800 = false
band_gsm_1900 = false
band_wcdma_850 = false
band_wcdma_900 = false
band_wcdma_1900 = false
band_wcdma_2100 = false
band_lte_800 = false
band_lte_850 = false
band_lte_900 = false
band_lte_1800 = false
band_lte_1900 = false
band_lte_2100 = false
band_lte_2600 = false
band_lte_1700 = false
band_lte_700 = false
band_tdd_lte_2600 = false
band_tdd_lte_1900 = false
band_tdd_lte_2300 = false
band_tdd_lte_2500 = false
}
sim {
id = 2