Robustel GoRugged R3000 - Port Mapping

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 59 / 124
Confidential
Filtering Rules
Item
Description
Default
Index
Show the index of the filtering rule or the MAC binding rule.
1
Description
Enter some simple words about this filtering rule. It can be null.
Null
Source Address
Defines if access is allowed from one or a range of IP addresses which are
defined by Source IP Address, or every IP addresses.
Null
Source MAC
Enter the MAC address of the defined source IP address.
Null
Target Address
Defines if access is allowed to one or a range of IP addresses which are
defined by Target IP Address, or every IP addresses.
Null
Protocol
Select from “All”, “TCP”, “UDP”, “ICMP”, “TCP-UDP”.
If you don’t know what kinds of protocol of your application, we
recommend you select “ALL”.
All
Action
Select from “Accept”, “Drop”.
Accept: When Default Filtering Policy is drop, router will drop all the
connecting requests except the hosts which fit this accept filtering list.
Drop: When Default Filtering Policy is accept, router will accept all the
connecting requests except the hosts which fit this drop filtering list.
Drop
Port Mapping
Click “ ” to add port mapping rules. (The maximum number of the port mapping rule is forty.)
Port Mapping
Item
Description
Default
Index
Show the index of the port mapping rule.
1
Description
Enter some simple words about this port mapping. It can be null.
Null
Internet Port
Set the internet port of router which can be accessed by other hosts from
internet.
Null