Robustel GoRugged R3000 - Page 59

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 58 / 124
Confidential
General Setting & Access Control
Item
Description
Default
Enable Filtering
Enable filtering rules.
ON
Default Filtering Policy
Select from “Accept” and “Drop”. Cannot be changed when filtering rules
table is not empty.
Accept: Router will accept all the connecting requests except the hosts
which fit the drop filter list.
Drop: Router will drop all the connecting requests except the hosts which
fit the accept filter list.
accept
Enable Remote SSH
Access
Enable to allow users to access the router remotely on the internet side
via SSH.
OFF
Enable Local SSH Access
Enable to allow users to access the router on the local Ethernet via SSH.
ON
Enable Remote Telnet
Access
Enable to allow users to access the router remotely on the internet side
via Telnet.
OFF
Enable Local Telnet Access
Enable to allow users to access the router on the local Ethernet via Telnet.
ON
Enable Remote Http
Access
Enable to allow users to access the router remotely on the internet side
via Http.
OFF
Enable Local Http Access
Enable to allow users to access the router on the local Ethernet via Http.
ON
Enable Remote Https
Access
Enable to allow users to access the router remotely on the internet side
via Https.
ON
Enable Remote Ping
Respond
Enable to make router reply the Ping requests from the internet side.
ON
Enable DOS Defending
Enable to defend dos attack. Dos attack is an attempt to make a machine
or network resource unavailable to its intended users.
ON
Click “ ” to add filtering rules. (The maximum number of the filtering rule is twenty.)