Robustel GoRugged R3000 - PIN Assignment

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 18 / 124
Confidential
Note: Please go to Services --> Advanced to set the User LED Type.
2.2 PIN Assignment
SIM/NET/RSSI
Indicating Module
Abnormal
The SIM/NET/RSSI will blink to indicate the wrong status when the wireless module cannot
work normally. When the network is disconnected, those three signal LEDs are designed as a
binary combination code to indicate a series of error report.
Color Indicates: SIM-Green, NET-Green, RSSI-Green
Display Order: SIM, NET, RSSI
Meaning of Number: 1-Blink, 0-Off
100 module found but AT command failed
010 no SIM card inserted
110 need to enter the PIN code
001 need to enter the PUK code
101 registration failed
011 no module found
111 not support the module
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PIN
Debug
RS232
Direction
1
CR
Device R3000
2
CT
R3000  Device
3
GND
GND
4
TXD
R3000  Device
5
RXD
Device R3000
6
RTS
R3000  Device
7
CTS
Device R3000
PIN
Power
Digital I/O
RS485
Direction
8
Positive
9
Negative
10
GND
11
Input 1
R3000  Device
12
Input 2
R3000  Device
13
Output 1
R3000  Device
14
Output 2
R3000  Device
15
GND
16
Data+(A)
R3000  Device
17
Data- (B)
R3000  Device