EasyManua.ls Logo

Robustel GoRugged R3000 - Chapter 2 Installation; LED Indicators

Robustel GoRugged R3000
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 17 / 124
Confidential
Chapter 2 Installation
2.1 LED Indicators
Name
Color
Status
Function
RUN
Green
On
Router is starting (the duration will no longer than 30 sec)
On, 0.5 sec blink
Router is ready
Off
Router is power off
WLAN/PPP
Green
On
SIM card is normal and dials successfully
Off
SIM card is normal but dials unsuccessfully
SIM card is overdue
USR
Green
On
Enable the OpenVPN/IPsec, and connect successfully
Off
Set the User LED Type as None
Disable the OpenVPN/IPsec
Enable the OpenVPN/IPsec, but connect unsuccessfully
Green
On
Signal level: 21-31 (Perfect signal level)
Yellow
On
Signal level: 11-20 (Average signal level)
Red
On
Signal level: 1-10 (Exceptional signal level)
/
Off
No signal
NET
Green
On
4G is connected and PPP connection is established
On, blinking
4G is connected but PPP connection is failed
Yellow
On
3G is connected and PPP connection is established
On, blinking
3G is connected but PPP connection is failed
Red
On
2G is connected and PPP connection is established
On, blinking
2G is connected but PPP connection is failed
/
Off
Cannot register to any network
SIM
Green
On, blinking
The currently using SIM card is the backup card
Off
The currently using SIM card is not the backup card
No SIM card detected
No SIM card inserted

Table of Contents

Related product manuals