Robustel GoRugged R3000 - Specifications

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 13 / 124
Confidential
1.3 Specifications
Cellular Interface
 Standards: GSM/GPRS/EDGE/UMTS/HSPA/EVDO/FDD LTE
 GPRS/EDGE: 850/900/1800/1900 MHz
 HSPA+: 850/900/1900/2100 MHz, DL/UL 21/5.76 Mbps, fallback to 2G
 FDD LTE: 800/900/1800/2100/2600 MHz, DL/UL 100/50 Mbps, fallback to 3G/2G
 EVDO: 450 or 800/1900 MHz, Rev A/B
 SIM: 2 x (3 V & 1.8 V)
 Antenna interface: SMA female
Ethernet Interface
 Number of ports: 2 x 10/100 Mbps, 2 LANs or 1 LAN + 1 WAN
 Magnet isolation protection: 1.5 KV
WLAN Interface (Optional)
 Standards: 802.11b/g/n up to 65 Mbps, AP and Client mode
 Frequency band: 2.400 - 2.500 GHz (2.4 GHz ISM band)
 Security: Open ,WPA, WPA2
 Encryption: AES, TKIP
 Antenna interface: RP-SMA Female
 Transmission power: 802.11b: 17dBm, 802.11g/n: 15dBm
 Reception sensibility: 1M: -97dBm, 2M: -93dBm, 6M: -91dBm, 11M: -89dBm, 54M: -75dBm, 65M: -72dBm
Digital Input
 Type: 2 x DI, Dry Contact
 Dry contact: On: open, Off: short to GND
 Isolation: 3K VDC or 2K Vrms
 Absolute maximum VDC: “V+” + 5 VDC