Robustel GoRugged R3000 - Network->Route

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 56 / 124
Confidential
Server Setting@COM1
Item
Description
Default
TCP client.
3. UDP: Router works as UDP client.
4. Robustlink: Router will automatically upload the serial data to Robustlink
platform under the Robustlink protocol. Robustlink is a management platform
from Robustel. This function only available when Router is connects to
Robustlink.
Server
Address
Enter the address of server which will receive the data sent from R3000’s serial port.
IP address or domain name will be available.
Null
Server Port
Enter the specified port of server which is use to receive the serial data.
Null
3.13 Network->Route
This section allows user to set the static route. (The maximum number of the static route is twenty.)
Static Route
Click “ ” to add static routes, the maximum number of static routes is 20.
Static Route
Item
Description
Default
Index
Show the index of the static route.
1
Description
Enter some simple words about this route. It can be null.
Null
Destination
Define the destination IP address.
Null