Robustel GoRugged R3000 - Interface -> DI;DO

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 51 / 124
Confidential
3.11 Interface -> DI/DO
This section allows users to set the DI/DO parameters.
DI
The DI list shows the status of DI.
Click to enter the DI configuration window.
DI
Item
Description
Default
Enable
Click to Enable DI.
OFF
Mode
Select from “ON-OFF”, “Counter”.
ON-OFF: DI interface support ON and OFF mode (high or low level electrical)
trigger DI alarm. The mode default to ON, and OFF mode is available only
when enable inversion feature.
ON—Under this mode, DI alarm status will be triggered to ON when DI
ON-OFF