Robustel GoRugged R3000 - Page 53

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 52 / 124
Confidential
DI
Item
Description
Default
interface open from GND or input a high level electrical (logic 1), on the
contrary DI alarm status will be trigged to OFF when DI interface connect to
GND or input a low level electrical (logic 0).
OFF—Under this mode, DI alarm status will be triggered to ON when DI
interface connect to GND or input a low level electrical (logic 0), on the
contrary DI alarm status will be trigged to OFF when DI interface open from
GND or input a high level electrical (logic 1).
Counter: Event counter mode.
Inversion
Enable to set DI mode as OFF mode.
OFF
Threshold Value
Available when DI under Counter mode.
Input from 0 to 65535. (0=will not trigger alarm)
It will trigger alarm when event counter reaches this figure. After triggering
alarm, DI will keep counting but not trigger alarm again.
Null
DO
This DO list shows the information of DO.
Click to enter the DO configuration window.