Robustel GoRugged R3000 - Interface->LAN; Lan

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 42 / 124
Confidential
3.7 Interface->LAN
There are two LAN interfaces in R3000 router which includes lan0 and lan1. Both of R3000’s Ethernet are default to
lan0, and the default IP of lan0 is 192.168.0.1.
This section allows user to set the related parameters of LAN interfaces.
LAN
Click to edit the configuration of the current LAN interface. Click to delete the current LAN interface.
Note: Interface lan0 cannot be deleted.
Click to add a new LAN interface. The maximum number of LAN interface is two.
Note: When you are the first time to configure LAN interface and want to add a new LAN interface (lan1), please
remember to configure eth0 or eth1 as lan1 in Ethernet->Port Setting section before.
General Settings
Item
Description
Default
Interface
Select lan0 or lan1.
When eth0 used As WAN, lan1 is unavailable.
And lan1 available only if it was selected by eth0 or eth1 in
Ethernet->Port Setting section.
lan0
IP Address
Set the IP Address of the LAN interface.
192.168.0.1
Netmask
Set the Netmask of the LAN interface.
255.255.255.0
MTU
Maximum Transmission Unit. It is the identifier of the maximum
size of packet, which is possible to transfer in a given environment.
1500