Robustel GoRugged R3000 - VPN->Ipsec

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 63 / 124
Confidential
3.16 VPN->IPSec
This section allows users to set the IPSec and the related parameters.
General
General
Item
Description
Default
Enable NAT Traversal
Tick to enable NAT Traversal for IPSec. This item must be enabled when
router under NAT environment.
ON
Keepalive
The interval that router sends packets to NAT box so that to avoid it remove
the NAT mapping.
60
Debug Enable
Enable this function, and it will output IPSec information to the debug port.
OFF
Tunnel
Click “ ” to add tunnel settings. (The maximum number of the tunnel is three.)