Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 64 / 124
Confidential
Show the index of the tunnel.
Enter some simple words about the IPSec Tunnel.
Enter the address of remote side IPSec VPN server.
Select from “Tunnel” and “Transport”.
Tunnel: Commonly used between gateways, or at an end-station to a
gateway, the gateway acting as a proxy for the hosts behind it.
Transport: Used between end-stations or between an end-station and a
gateway, if the gateway is being treated as a host-for example, an encrypted
Telnet session from a workstation to a router, in which the router is the
actual destination.
Select the security protocols from “ESP” and “AH”.
ESP: Uses the ESP protocol.
AH: Uses the AH protocol.
Enter IPSec Local Protected subnet’s address with mask, e.g. 192.168.1.0/24
Enter IPSec Remote Protected subnet’s address with mask, e.g. 10.8.0.0/24
When choose “Authentication Type” to “PSK”.
When choose “Authentication Type” to “CA”.
To Next Page
Loading...
