Robustel GoRugged R3000 - Services->Web Server

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 87 / 124
Confidential
3.27 Services->Web Server
This section allows users to modify the parameters of Web Server.
Basic @ Web Server
Item
Description
Default
HTTP Port
Enter the HTTP port number you want to change in R3000’s Web Server.
On a Web server, port 80 is the port that the server "listens to" or expects to
receive from a Web client. If you configure the router with other HTTP Port
number except 80, only adding that port number then you can login R3000’s
Web Server.
80
HTTPS Port
Enter the HTTPS port number you want to change in R3000’s Web Server.
On a Web server, port 443 is the port that the server "listens to" or expects to
receive from a Web client. If you configure the router with other HTTPS Port
number except 443, only adding that port number then you can login R3000’s
Web Server.
Note: HTTPS is more secure than HTTP. In many cases, clients may be
exchanging confidential information with a server, which needs to be secured in
order to prevent unauthorized access. For this reason, HTTP was developed by
Netscape corporation to allow authorization and secured transactions.
443
Login Timeout (s)
Enter the Login timeout you want to change in R3000’s Web Server. After
“Login Timeout”, R3000 will force to log out the Web GUI and then you need to
re-login again to Web GUI.
1800
This section allows users to import the certificate file into the route.