Robustel GoRugged R3000 - Services->Event

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 76 / 124
Confidential
Syslog
Syslog Settings
Item
Description
Default
Enable
Click to enable Syslog setting.
OFF
Syslog Level
Select form “Debug”, “Info”, “Notice”, “Warning”, “Error” which from low to
high. The lower level will output more syslog in detail.
Notice
Save Position
Select the save position from “RAM”, “NVM” and “Console”. Choose “RAM”,
the data will be cleared after reboot. But it's not recommended that saving
syslog to NVM (Non-Volatile Memory) for a long time.
RAM
Log to Remote
Enable to allow router sending syslog to the remote syslog server. You need to
enter the IP and Port of the syslog server.
OFF
Application Debug Control
Enable Modem Debug
Click to enable router to debug Modem.
ON
Enable Link Manager
Debug
Click to enable router to debug Link Manager.
ON
Enable APP Debug
Click to enable router’s debug control for all other applications.
ON
3.20 Services->Event
This section allows users to set the Event parameters.
Event @ Event
Item
Description
Default
Signal Quality
Threshold
Router will generate log event when signal quality less than the threshold, 0
means disable.
0
Click “ ” button to add an Event parameters.