Robustel GoRugged R3000 - Services->Syslog

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 75 / 124
Confidential
GRE
Item
Description
Default
Index
Show the index of the tunnel.
1
Enable
Enable GRE tunnel. GRE (Generic Routing Encapsulation) is a protocol that
encapsulates packets in order to route other protocols over IP networks.
ON
Description
Enter some simple words about the GRE Tunnel.
Null
Remote IP Address
Set remote IP Address of the virtual GRE tunnel.
Null
Local Virtual IP
Set local IP Address of the virtual GRE tunnel.
Null
Remote virtual IP
Set remote IP Address of the virtual GRE tunnel.
Null
Enable Default Route
All the traffics of R3000 router will go through the GRE VPN.
OFF
Enable NAT
Tick to enable NAT for GRE. The source IP address of host Behind R3000 will be
disguised before accessing the remote GRE server.
Disable
Secrets
Set Tunnel Key of GRE.
Null
This section allow user to check the status of GRE tunnel.
3.19 Services->Syslog
This section allows users to set the syslog parameters.