Robustel GoRugged R3000 - Page 63

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 62 / 124
Confidential
QoS
Item
Description
Default
Bandwidth
other priorities when this function is enabled, and will be limited to the
specified bandwidth when this function is disabled. Limited specified
bandwidth algorithm: priority defined percent x uoad/download bandwidth
set in Interface->Link Manager WWAN/WAN.
Click to add a new QoS rule.
QoS
Item
Description
Default
Source Address
Enter the IP address of the source host.
format: x.x.x.x, x.x.x.x/xx, x.x.x.x-x.x.x.x, empty means anywhere
Null
Source Port
Enter the port number of the source host.
Null
Source MAC
Enter MAC address of the source host. Router supports up to 20 users set with
QoS MAC Control. Priority of QoS MAC Control is higher than that of QoS IP
control.
Null
Target Address
Enter the IP address of the target host.
Target Port
Enter the port number of the target host.
Protocol
Select from “All”, “TCP”, “UDP”, “ICMP” and “TCP&UDP”.
All
Priority
Select from “Highest”, “High”, “Normal”, “Low”, “Lowest”.
Those priorities had been defined in Network->QoS->Priority Definition.
Normal
Note:
1. If services are in the same priority level, router will automatically start Stochastic Fairness Queueing (SFQ)
strategy to make a fair bandwidth allocation.
2. If the link between a source host and target host had set QoS 3 rules. At this time it won’t consider the priority
but will only choose the ranked first one to take effect.