Robustel GoRugged R3000 - Page 37

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.3.0.3 04.02.2017 36 / 124
Confidential
When disable “Automatic APN Selection”, the window will display just like the following screenshot.
WWAN Setting
Item
Description
Default
Automatic APN Selection
ON
ON: R3000 will recognize the access point name automatically.
ON
Dialup Number
Dialup number for cellular dial-up connection, provided by local ISP.
*99***1#
Authentication Type
Select from “Auto”, “PAP” and “CHAP” as the local ISP required.
Auto
Aggressive Reset
The module will be reset when the link become unreachable.
OFF
Switch SIM By Data
Allowance
Switch to another SIM when reach data allowance, only use for dual
SIM backup.
OFF
Data Allowance
Set the monthly data traffic limitation.
The system will record the data traffic statistics when data traffic
limitation (MiB) is specified. The traffic record will display in Link
Manager->Status-> WWAN Data Usage Statistics section.
0 means disable data traffic record.
0
Billing Day
This option specifies the day of month for billing, the data traffic
statistics will be recalculated from this day.
1
Redial Interval
Seconds to wait for redial.
10
Automatic APN Selection
OFF
OFF: Select access point name manually.
/
APN
Access Point Name for cellular dial-up connection, provided by local ISP.
internet
Username
User Name for cellular dial-up connection, provided by local ISP.
Null
Password
Password for cellular dial-up connection, provided by local ISP.
Null