Robustel M1200 User Guide
RT_UG_M1200_v.1.0.2 9 Apr., 2018 18/78
Use 3 pcs of ST2.9*6 flat head self-tapping Phillips screws to fix the wall mounting kit to the gateway, and then
use 2 pcs of M3 drywall screws to mount the gateway associated with the wall mounting kit on the wall.
Note: Recommended torque for mounting is 1.0 N.m, and the maximum allowed is 1.2 N.m.
ļ DIN rail mounting (measured in mm)
Use 3 pcs of ST3*8 flat head self-tapping Phillips screws to fix the DIN rail to the gateway, and then hang the DIN
rail on the mounting bracket. It is necessary to choose a standard bracket.
Note: Recommended torque for mounting is 1.0 N.m, and the maximum allowed is 1.2 N.m.
To Next Page
Loading...
