Robustel M1200 - Robustel M1200 Services Configuration; M1200 Syslog and Event Alerts

Robustel M1200 User Guide
RT_UG_M1200_v.1.0.2 9 Apr., 2018 55/78
3.10 Services > Syslog
This section allows you to set the syslog parameters. The system log of the gateway can be saved in the local, also
supports to be sent to remote log server and specified application debugging. By default, the “Log to Remote” option
is disabled.
The window is displayed as below when enabling the “Log to Remote” option.
Syslog Settings
Item
Description
Default
Enable
Click the toggle button to enable/disable the Syslog settings option.
OFF
Syslog Level
Select from “Debug”, “Info”, “Notice”, “Warning” or “Error”, which from low to
high.
Note: The lower level will output more syslog in details.
Debug
Save Position
Select the save position from “RAM”, “NVM” or “Console”. Choose “RAM”. The
data will be cleared after reboot.
Note: It's not recommended that you save syslog to NVM for a long time.
RAM
Log to Remote
Click the toggle button to enable/disable this option. Enable to allow gateway
sending syslog to the remote syslog server. You need to enter the IP and Port of
the syslog server.
OFF
Remote IP Address
Enter the IP address of syslog server when enabling the “Log to Remote” option.
Null
Remote Port
Enter the port of syslog server when enabling the “Log to Remote” option.
514