Robustel M1200 - Page 62

Robustel M1200 User Guide
RT_UG_M1200_v.1.0.2 9 Apr., 2018 62/78
WakeUp
Item
Description
Default
WakeUp
Enable
Click the toggle button to enable/disable this option. When it is
set to ON, the current link is disconnected, while set to OFF, the
device restarts GPRS dial-up.
OFF
Timing General Settings
Index
Display number.
--
Enable
Click the toggle button to enable/disable this option. When it is
set to ON, the gateway make GPRS dial-up on the set timing.
OFF
Timing
Every day at the timing (HH:MM) the gateway makes GPRS
dial-up.
Null
Periodical
Periodical WakeUp
Click the toggle button to enable/disable this option. When it is
set to ON, the gateway will periodically make GPRS dial-up.
OFF
Interval
Set the interval time for Periodical WakeUp, ranging 3-720 min.。
5
Serial Data
Serial Data WakeUp
Click the toggle button to enable/disable this option. When it is
set to ON, while sending data to the serial port, the gateway
make GPRS dial-up.
OFF
SMS
SMS WakeUp
Click the toggle button to enable/disable this option. When it is
set to ON, while gateway receives SMS from the set phone
number, the gateway make GPRS dial-up.
OFF
Enable SMS Reply
Click the toggle button to enable/disable this option. When it is
set to ON, while the gateway makes GPRS dial-up via SMS
WakeUp, it will send a reply message to the WakeUp phone
number.
OFF
Phonenum
The phone number which is allowed to wake up the gateway,
separated each number by a ';' character.
Null
Password
The phone number needs to send the password to the gateway.
If the sent content and the set password do not match, the GPRS
dial-up cannot be performed.
Null