W W W.ROCCAT.ORG / SUPPORT
mAiN CONTROL
Switch to advanced editor
In the center window you can manually change the
time intervals between the individual key presses
for a particular macro. Individual blue bars
indicate how long the respective key is pressed
for. Along with the duration, you can also change
the position of the pressed key here. The default
timeline is in milliseconds: (0.05 / 0.10 / 0.15 …
seconds).
You can change the time scale of the display for
increased accuracy. You can zoom into the scale
to configure the time values really precisely using
the plus button on the right-hand side above
the window. It is also possible to delete or add
individual macros. To do that, click the point in the
macro list where you want to insert an additional
macro and then click ‘Add’. If you want to delete a
key, click the key and then click ‘Del’. Confirm the
process by clicking ‘Ok’.
It is also possible to delete entire macro sets.
To do that, you need to select ‘Delete Macro
Set’ in the dropdown menu. Here too, you need
to confirm final deletion of the set, and all the
macros assigned to it, by clicking ‘Ok’.
To Next Page
Loading...
