Roche Accu-Chek Guide - Page 54

53
Meter Maintenance and Troubleshooting
9
Data could not be transferred from the
meter to the PC.
Check the PC or USB cable.
Data cannot be sent to a paired device
because the meter is in Flight Mode.
Retry the data transfer when the meter is
not in Flight Mode.
One or more blood glucose results are
excluded from the selected averages
because the results are invalid or outside
the system measuring range.
One or more blood glucose results are
excluded from the selected target % data
because the test results are invalid.
One or more blood glucose results are
excluded from the selected low/high data
because the test results are invalid.
The date entered is not valid.
Enter the correct date.
A meter setting was changed while in
Flight Mode.
The setting change will not take eect
until Flight Mode is turned o.
Pairing to a device cannot be performed
while in Flight Mode.
Retry pairing when the meter is not in
Flight Mode.
82052_08100918004.indd 53 6/9/2020 12:09:12 PM