192 Rockwell Automation Publication 2198-UM005C-EN-P - February 2022
Appendix B Upgrade Kinetix 5300 Drive Firmware
9. Click Close.
10. Minimize the RSLinx application dialog box.
Start the ControlFLASH Software
Follow these steps to start ControlFLASH software and begin your firmware
upgrade.
1. In the Logix Designer application, from the Tools menu, choose
ControlFLASH.
The Welcome to ControlFLASH dialog box appears.
2. Click Next.
The Catalog Number dialog box appears.
You can also open ControlFLASH software by choosing
Start>Programs>FLASH Programming Tools>ControlFLASH.
To Next Page
Loading...
Need help?
General
