Publication 2711C-UM001C-EN-P - September 2009 23
Configuration Mode Chapter 2
Select a Terminal Language
You can change the terminal display language. The terminal is
shipped with the English, Portuguese, French, Italian, German,
Spanish, and Chinese fonts installed. Korean is available but you must
first install the Korean font. Refer to page 74 for information on how
to install the font by upgrading the firmware.
Follow these steps to change the terminal language using the
PanelView Explorer Startup window.
1. Go to the PanelView Explorer Startup window.
2. Click the Terminal Settings link.
3. Click the System Information tab.
4. Select a language from the Terminal Language pull-down list.
5. Click Apply or click Cancel to restore the current setting.
To Next Page
Loading...
Need help?
General
