34 Publication 2711C-UM001C-EN-P - September 2009
Chapter 2 Configuration Mode
5. Click OK within 30 seconds once the message appears to accept
the changes or the old settings are kept.
Reboot the Terminal
You can restart the terminal without having to disconnect and reapply
power. After a reset, the terminal performs a series of startup tests and
then either enters configuration mode or runs the startup application.
Follow these steps to reboot the terminal from the PanelView Explorer
Startup window.
1. Go to the PanelView Explorer Startup window.
2. Click the Terminal Settings link.
3. Click the Display/Input tab.
4. Click Reboot Terminal button.
To Next Page
Loading...
Need help?
General
