Publication 2711C-UM001C-EN-P - September 2009 33
Configuration Mode Chapter 2
6. Repeat step 5 as the target moves around the screen.
7. Tap the screen when prompted to register saved data.
If you don’t tap the screen within 30 seconds, the calibration data is
lost and the current settings are retained.
Follow these steps to calibrate the touch screen from the terminal.
1. Click Display on the menu list.
2. For C600 and C1000 terminals, click Calibrate Touchscreen.
3. For C300 touch screen terminals, press the right arrow to go to
the calibration screen.
4. Carefully press and briefly hold stylus on the center of the target.
Repeat as the target moves around the screen.
To Next Page
Loading...
