52 Rockwell Automation Publication 750-IN119A-EN-P - April 2022
Chapter 4 Mechanical and Electrical Installation
Figure 31 - Enclosure Code N (IP20, NEMA/UL Open Type) Wall Mount, Frames 2…5
Figure 32 - Enclosure Code G (IP54, NEMA/UL Type 12) Wall Mount, Frames 2…5
To remove or replace the cover, use these tools and torque:
• Recommended torque (screws and nuts) = 0.68 N•m (6.0 lb•in)
• Recommended screwdriver = 6.4 mm (0.25 in.) flat or T20 Hexalobular
• Recommended hex socket = 7 mm
To Next Page
Loading...
