Rockwell Automation Publication 750-IN119A-EN-P - April 2022 95
Chapter 6 Service and Maintenance
Commonly Used Installation
and Service Tools
This list includes the tools that are needed for installation, test measurements,
basic maintenance, and repairs.
Table 26 - Renewal Parts—Precharge Circuit Boards
Part / Kit Description Catalog Number Publication
Frame 6, 400V/480V, AC Precharge Board SK-RT-ACPC-CDF6
750-TG101S
Frame 6, 400V/480V, AC Precharge Board, XT SK-RT-ACPC-CDF6-XT
Frame 7, 400V/480V, DC Precharge Board SK-RT-ACPC-CDF7
Frame 7, 400V/480V, DC Precharge Board, XT SK-RT-ACPC-CDF7-XT
Frame 6 and 7, DC Precharge Board SK-RT-DCPC-F67
Frame 6 and 7, DC Precharge Board, XT SK-RT-DCPC-F67-XT
Table 27 - Renewal Parts—Leg Kits
Part / Kit Description Catalog Number Publication
Frame 6, Replacement Leg Kit SK-R9-LEG1-F6
RA-IN026
Frame 7, Replacement Leg Kit SK-R9-LEG1-F7
Table 28 - Renewal Parts—EMC C3 Bracket Kits
Part / Kit Description Catalog Number Publication
Frame 1, Replacement EMC C3 Bracket Kit SK-RT-EMC3-F1
This publication, see
page 61
Frame 2, Replacement EMC C3 Bracket Kit SK-RT-EMC3-F2
Frame 3, Replacement EMC C3 Bracket Kit SK-RT-EMC3-F3
Frame 4 Replacement EMC C3 Bracket Kit SK-RT-EMC3-F4
Frame 5, Replacement EMC C3 Bracket Kit SK-RT-EMC3-F5
IMPORTANT Care must be taken to be sure that tools and/or hardware components
do not fall into open drive assemblies. Do not energize the drive unless
all loose tools and/or hardware components have been removed from
the drive assemblies and enclosure.
Table 29 - Installation and Service Tools
Tool Description Details
Allen socket wrench 4 mm, 5 mm
Allen socket wrench extension 254 mm (10 in.)
Box wrench 7 mm, 8 mm, 10 mm, 13 mm, 17mm, 19 mm, 22 mm
Crimping tools For cable terminals 1.5...240
Current clamp 1000A (AC, rms), signal output
ESD-protected place of work Work surface, floor cover, seat, and ground connections
ESD-protective clothing Wrist wrap, shoes, overall clothing (coat)
Flashlight —
Flat-nose screwdriver 3 mm (0.12 in.), 5 mm (0.19 in.), 6.4 mm (0.25 in.), 9.5 mm (0.375 in.), #1, #2
Fuse puller —
Hexalobular (star or Torx) screw
driver/bit
#15, #20, #25, #30, #40, #45
Hexagonal socket wrench 2.5 mm, 7 mm, 8 mm, 10 mm, 12 mm, 13 mm, 17 mm, 18 mm
Insulation tester 1000V DC
To Next Page
Loading...
