66 Rockwell Automation Publication 750-IN119A-EN-P - April 2022
Chapter 5 Power Wiring
Figure 42 - Frames 6 and 7 Power Terminal and Termination Point Locations
Frame 6
Frame 7
400/480V drives shown.
No. Name Description
1 Power terminals R/L1, S/L2, T/L3, U/T1, V/T2, W/T3
2 PE grounding studs
Terminating point to chassis ground for incoming AC line
and motor shield.
3 DC Bus and brake terminals +DC, -DC, BR1, BR2 (optional)
4 DC+ and DC- Bus voltage test points (Touch guard removed)
To Next Page
Loading...
