Rockwell Automation Allen-Bradley PowerFlex 755TS TotalFORCE Control - Page 69

Rockwell Automation Publication 750-IN119A-EN-P - April 2022 69
Chapter 5 Power Wiring
Figure 44 - Frames 6 and 7 Common DC Input Power Terminal and Termination Point Locations
1
1
3
3
4
4
2
2
Frame 6
Frame 7
No. Name Description
1 Power terminals +DC, -DC, U/T1, V/T2, W/T3
2 PE grounding studs
Terminating point to chassis ground for incoming DC line and
motor shield.
3 DC Bus and brake terminals +DC, -DC, BR1, BR2
4 DC+ and DC- Bus voltage test points