Rockwell Automation Allen-Bradley Ultra3000 Integration Manual

Publication 2098-IN005C-EN-P — March 2008
64 Commissioning Your Ultra3000 Drive
If Then
Your test completes successfully, this dialog appears. 1. Click OK.
2. Remove Drive Enable (Input 1) signal (CN1-31)
applied earlier.
3. You are finished tuning your Ultra3000 drive.
Your test failed, this dialog appears. 1. Click OK.
2. Make an adjustment to motor velocity.
3. Refer to the appropriate Logix motion module
setup and configuration manual for more
information.
4. Return to step 7 and run the test again.

Rockwell Automation Allen-Bradley Ultra3000 Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley Ultra3000
Category	Servo Drives
Language	English