Rockwell Automation Logix 5000 User Manual

Chapter 1 Program a Function Block Diagram
30 Rockwell Automation Publication 1756-PM009J-EN-P - March 2022
As you program your routine, periodically verify your work.
1. On the Standard toolbar, click the Verify icon.
If there are errors, they are listed in the Output window on the Errors
tab at the bottom of the Logix Designer application.
2. Press F4 to go to the first error or warning.
3. Correct the error according to the description in the Errors tab.
4. Repeat steps 1...3 until all of the errors are corrected.
5. To close the Output window, press Alt + 1.
Verify the routine

Rockwell Automation Logix 5000 Specifications

General

Brand	Rockwell Automation
Model	Logix 5000
Category	Controller
Language	English