ROEL CERBER C82 - Zones

5
• Programmable reporting codes for “zone alarming”, “zone restore” and “zone
bypassing” (automatic „from swinger” or by the panel - during home arming periods, if
the zones have the attribute „stay” - and manually by the users);
• Programmable zone restore (the „zone restore event” is recorded either in real time for
each violated zone, when the violated zone „closed back”, or upon bell cut-off, for all zones
that previously triggered the alarm);
• Programmable reporting codes for Arming/Disarming/Ambush events, according to
the user code;
• Programmable reporting codes for system trouble situations: „Low battery voltage”,
„Restore battery voltage”, „AC power loss”, „AC power Restore”, „Bell Trouble” (upon
disconnection or burnt fuse), “Bell trouble Restore”, „Burnt fuse on AUX”, „Fuse on AUX
Replaced”, „ System date and hour Loss”, „System date and hour Reprogrammed”, „Keypad
lockout”;
• Cancellation of reporting to CS may be performed only by installer.
UPLOAD/DOWNLOAD
• Several upload/download operations:
- Uploading the system parameters from control panel onto PC (actually, onto
„EZcom C52/C82 Software”);
- Downloading the programming of system parameters from PC (actually, from
„EZcom C52/C82 Software”) onto the control panel (PC programming using
„EZcom C52/C82 Software”);
- Uploading the event LOG from the control panel into the „EZcom C52/C82
Software” (actually, in a file);
- System date and hour setting by PC (actually, by „EZcom C52/C82 Software”);
- System (or partitions) arming/disarming by PC (actually, by „EZcom C52/C82
Software”);
- Zone bypassing by PC (actually, by „EZcom C52/C82 Software”);
- PGM activation/deactivation by PC (only for PGM outputs defined as „mono-stable”,
“bi-stable” or “clock timer” types);
- Online visualization of the system/partitions status and troubles onto „EZcom
C52/C82 Software”;
- Online visualization of the bypassed, alarmed or open zones onto „EZcom
C52/C82 Software”.
• 425-event LOG with upload and visualizing possibility through the „EZcom C52/C82
Software” and optionally reported to CS;
• Option of automatic answers to PC calls, either after „double call” or after
programmable number of rings;
• Manually activation of communication with PC (PC download acceptance),
performed by master or by installer;
• Communication between PC and panel Cancellation, performed by master or by
installer.
ZONES
• 5 fully programmable zones on the main board, expandable to 10 zones using zone
doubling feature (Cerber C52)
• 8 fully programmable zones on the main board, expandable to 16 zones using zone
doubling feature (Cerber C82)
• all zones may be programmable with single or double EOL resistor, NC contacts,
tamper recognition and programmable as delayed, instant, follower, 24 hour burglary,
fire, tamper, panic, medical emergency, arming/disarming (“keyswitch”);
• 13 zone attributes, individually programmable as “audible/silent alarm”,
“steady/pulsing siren”, “manual bypassing”, “auto shutdown”, “forced arming”, “chime
function activating”, “stay”, “intellizone”, , as well as individually selectable zone
response time;
• “Zone bypassing” (automatic “from swinger shut-down” or caused by home arming, if
the zones have the “stay” attribute activated - and manually by the users);