Restoring the Operating-System Installation R&S FSP
1164.4556.82 4.2 E-1
Restoring the Operating-System Installation
If the operating system can no longer be booted, it is possible to boot the analyzer in the boot menu
from the backup partition, and to restore the operating-system installation. The function is not available
for instruments equipped with option B20.
Please select the operating system to start:
Analyzer Firmware
Analyzer Firmware Backup
Use the up and down arrow keys to move the highlight to your
choice.
Press ENTER to choose.
Seconds until highlighted choice will be started automatically: 5
For troubleshooting and advanced startup options for Windows,
press F8.
The boot of the backup p
is selected in the boot menu
(Analyzer Firmware Backup)
using the cursor keys and
confirmed with ENTER.
After the operating system has
been started from the backup
partition, a window appears
containing the different restore
functions.
The selected operation is started
by entering the corresponding
number, and the operating-
system files are copied from the
backup partition to the analyzer
partition.
After the files have been copied,
the instrument starts up and the
firmware is reinstalled. This is
automatically followed by a cold
for recognizing the analyzer
hardware.
To Next Page
Loading...
